Identifying the Rear Quarter Glass on Your Range Rover Velar
Determining the correct replacement quarter pane for your Range Rover Velar starts by identifying whether your vehicle was delivered with factory dark privacy glass or standard green-tinted transparency. Velar builds featuring the standard green tint use part LR125999 on the driver side, whereas vehicles optioned with the deeply darkened factory rear glass utilize part LR126000 for the left side and LR125998 on the passenger side. These newer numbers replaced earlier revisions such as LR093217, LR111058, LR093215, and LR111056. Holding a sheet of white paper against the inside of the glass while looking through the outside face under natural daylight quickly clarifies if you have the dark rear treatment or a light green solar hue.
The exterior finish package on your vehicle dictates the aesthetic frame bonded directly around the pane. Range Rover Velar models equipped with the R-Dynamic exterior pack, the SVAutobiography Dynamic Edition, or the optional Black Exterior Pack feature a deep gloss-black surround trim moulded permanently onto the quarter glass edge. Base models and standard specification trims often contrast this area with bright aluminum or satiny chrome lower belt accents. Because this encapsulation is physically unified with the glass rather than detached as a clip-on piece, matching the exterior trim package of your vehicle is necessary to keep the uninterrupted floating-roof effect intact between the rear door C-pillar and the D-pillar.
Interior Access, Hardware, and Aperture Differences
The fixed rear quarter glass on the L560 platform is not purely held by adhesive; Land Rover engineered it with integrated alignment locator spacers and mechanical retaining screws that anchor directly into the vehicle's unibody structure. To access these internal fasteners and secure a leak-free fitment, I dismantle the interior luggage compartment quarter trim panels rather than trying to force exterior clips. Because I operate entirely as a mobile service, I travel directly to your home or office anywhere across Toronto and the surrounding Greater Toronto Area to carry out this detailed disassembly right where the vehicle sits.
Unlike the tailgate glass or the front windshield, this side glass does not route any defrosting heating grids, camera brackets, or forward-facing rain sensors. It serves purely to seal the rear quarter luggage space while blending flush against the upper pillar appliqué. Land Rover's workshop documentation designates any removed quarter unit as a single-use assembly, meaning that once the original pane is breached or removed, the damaged encapsulation and built-in mounting pins prevent it from being reinstalled. Utilizing the proper aftermarket quarter unit ensures the inner fasteners sit accurately against the body frame and keeps the flush exterior line consistent with the surrounding sheet metal.
